Tonarm Stogi S, Copper wiring med RCA Bullets
Finns även med Cardas wiring och RCA Bullets, se ovan
Här är bra bilder i tillverkarens broschyr!
This is of a unipivot design with a unique, rigid headshell made from a solid aluminium block and a base of solid brass which control all vibration and facilitate stability of the tonearm as a whole. All parts of the arm are machined from blocks of solid metal, in order to provide damping and minimise resonance. The polished pivot point is sited in an oil well, which provides extremely low friction and bearing vibration. The height is at record level for optimum tracking. The silicone damping,controls resonance of the cartridge and also gives stability in azimuth direction.
Two counterweights allow easy adjustments of tracking force and azimuth. Fine azimuth adjustment is achieved by rotation of a horizontal screw in the counterweight, which does not affect other tonearm parameters and which makes adjustment very simple.
Wires are in one uninterrupted piece from headshell to RCA phono connectors. By special order, wiring can also be fitted in for balanced connection.
effective lenght 229 mm
pivot to spindle distance 212 m
effective mass 11 gr
height adjustment yes
azimuth adjustment yes
fine azimuth adjustment yes
bias adjustment yes
arm mount 25 mm or collar
mass 600 gr